Thank you for purchasing Rebelle 6 Software or Volume Licenses for yourself or your school!


Escape Motions offers two types of licenses for schools and individuals that are in school or teach: Standalone and Floating. Choosing the most appropriate license type depends on the computers, accounts, and network setup of each particular school.


** Note: If you purchased a single Rebelle 6 license key, you will need to follow the instruction for the Standalone installation. 


Standalone: Rebelle license is tied to a single Windows or macOS account on a single computer and is not transferable to other computers. Choose this type of license:

  • When you have some amount of Rebelle licenses, and you need to run Rebelle on the same amount of computers (or less), and each computer runs Rebelle under a single local Windows or macOS account.
  • Floating: Rebelle license can be assigned to any Windows or macOS account on any computer on your local network. When Rebelle is closed, its license slot is freed and made available to any other computer on your local network that asks for it. Choose this type of license:
  • When you need to run Rebelle on more computers than you have Rebelle licenses and/or there are multiple Windows accounts that run Rebelle on your computers

If you are not sure which license type is more suitable for your school, please visit the FAQ on Escape Motions website or send an email directly to support@escapemotions.com


You will need to create an account on the Escape Motions website to be able to start the Rebelle software download. 


** There is a section at the bottom for Troubleshooting. 


*** If at any time you need assistance or have questions about installing the Rebelle Support Team at support@escapemotions.com


Instructions for redeeming the Rebelle Edu software 



[1] Use the link to the right to start the Rebelle software download and registration process.


www.escapemotions.com/redeem
[2] Enter the Redeem Code you received after the purchase and the school’s active Email Address.

Click "Redeem."


*Rebelle registration will be linked to this email address. Therefore we advise you to choose either a general school email address, a teacher’s, or an IT admin’s email address.




[3] Create a Community account: Username and Password. Then review and agree to the Terms of Use and Privacy Policy. To finish, click "Create account."

In the next step, you will receive software download links. You can also download Rebelle and its updates anytime from your Community account. After logging in, click on “My Account” and “Purchases."


[4] In the installation process, you will have to choose whether to install a Standalone or Floating license and follow the installation guide instructions below. Once the installation is complete, please send us an email stating which license you chose to support@escapemotions.com. Please include the name of your school and email address used for registration.

Standalone License Setup

You only need to install and register Rebelle:

  1. Download Rebelle from the links received via email
    or your Community account. After logging in, click on “My Account”
    and “Purchases."
  2. Install the application. In the "License Type" step of the
    installer (first step on Windows), please choose "Standalone license."
    • If you have a shared network folder accessible from student computers,
      you can install Rebelle to that shared folder. Students will run
      Rebelle from there.
    • Or you can install Rebelle on each student’s computer individually.
  3. After the installation, please run Rebelle on each computer for the first time.
    You will be asked to register it. In this step, use the same Community
    account credentials (email/username and password) on each device. 




Floating License Setup
You will need to install Rebelle and the Floating License Server (FLS).



Floating License Server Installation
FLS needs to be installed on any computer on your local network connected to the internet (e.g. on the teacher's computer or on your school server). FLS provides licenses for Rebelle.

[1] Use the links to the right to download and install the Floating License Server for your network operating system type.


Download and install our "Escape Motions Floating License Server" application from here:

Windows 64bit:
https://escapemotions.com/products/rebelle/download/tmp/floatlicserver/Escape_Motions_Floating_License_Server_64bit_v1.0.7_Windows.exe 

MacOS:

https://escapemotions.com/products/rebelle/download/tmp/floatlicserver/Escape_Motions_Floating_License_Server_64bit_v1.0.7_MacOS.dmg

[3] When you run FLS on Windows, the system asks you for permission to access FLS from local networks. Please, allow access for both, private and public networks.


[4] The FLS application has to be running to allow Rebelle instances to run on your local network. There can be only a single instance of FLS running for each Escape Motions account. You can run the server application at the beginning of each lesson and then close it, or you can keep it running.



[5] For Windows users only:
If you want to run FLS at the system's startup as a Windows service, check the box at the top of the FLS window:




{6] Then close the FLS application, open Windows services:




[7] Double-click on the "Escape Motions Floating License Server" service and click on the "Start" button. 

If you get an error message, please see the Troubleshooting section below.




Rebelle Installation

 

  1. Download Rebelle from the links received via email or your Community account. After logging in, click on “My Account”
    and “Purchases."
  2. Install the application. 
    • When installing on Windows, please choose "Floating license" in the "License Type" step of the installer (first step).
    • When installing on MacOS, you need to copy "Rebelle 6.app" in e.g.
      Applications and download
      "Rebelle 6.args" file (https://www.escapemotions.com/products/rebelle/download/tmp/floatlicserver/Rebelle 6.args )
      and place it next to "Rebelle 6.app".
    • If you have a shared network folder accessible from student computers, you can install Rebelle to
      that shared folder. Students will run Rebelle from there.
    • Or you can install Rebelle on each student computer individually.

 

When a student runs Rebelle, it looks for the FLS on your local network. When the FLS is found, Rebelle asks it for a
license slot and then starts up. When Rebelle is closed, its license slot is automatically released for other students.

 

In case your FLS is on a different network or there is a problem with an automatic UDP service discovery, you can
specify the FLS IP address as a command line argument when running Rebelle:
"C:\Program Files\Rebelle 6\Rebelle 6.exe" -floating-license-server 1.2.3.4:8264

You can also put those command line arguments into a text file "Rebelle 6.args" (located in the same folder
as "Rebelle 6.exe" on
Windows or "Rebelle 6.app" on macOS) with the following content:
-floating-license-server 1.2.3.4:8264
In this case, Rebelle will always try to connect to the given FLS IP address, even when it is ran from the windows start menu.

In the example above, 1.2.3.4 is the FLS IP address and 8264 is the default FLS port number.


Troubleshooting

Rebelle can't find the Floating License Server on your network even though it is running

The Floating License Server listens on UDP port 9426 and TCP port 8264, so make sure your network and 

firewall allows communication on these ports. Kindly ask your network admin to check it for you.



On the Windows computer where you run FLS, open the Windows Defender Firewall:


Click on "Advanced settings":



You should see these two lines in the "Inbound rules" list:



The same screenshot split for better readability




An error message pops up when starting the FLS as a windows service:



Please, open the Windows "Event Viewer"


Then, in the Event Viewer window, go to "Windows Logs" -> "Application". You should see several records from the "Escape Motions Floating License Server" source which should be spread over just a few seconds. You need to switch to the "Details" tab (not "General") in the lower panel to see messages. Please, read through a few latest ones and you should see some clues there. You can send us those log messages to support@escapemotions.com